Electronic Ignition

A Powerspark Electronic Ignition kit is designed to replace the problematic and old fashioned points / condenser starting mechanism in your classic car.

How does the Powerspark Electronic Ignition kit give benefits?

The POWERSPARK electronic circuit senses startup and develops more energy for quicker, easier starting, which leads to better fuel economy and smoother running in general.

It also has built in ‘over current protection’ that shuts down the system, preventing component damage if the ignition is left switched on and the engine not running.

Not sure if electronic ignition is for you?

Read REAL customer reviews here

  1. Aaron Collinson says:

    Hi, I’ve had this distributor 2 years now and its going good. do i need to oil it at all? or any other maintenance?
    Thank you

  2. Raymond Connor says:

    do you have one for a willys jeep thats got the auto lite dist 1ay-4012

  3. Pat says:

    Tried everything to get a K4 8/16 set fitted to a 25d distributor in a 1000cc mini. Wont go, no spark, tried new coils and everything else. Even fitted another kit to the distributor – still nothing – no spark !! I am no slug but this is blowing my mind. Any thoughts ?? The car was running fine beforehand. Cheers Pat

    • simonbbc says:

      The K4 is for the 45D distributor certainly not the 25D. Can you contact [email protected] please?


      • Pat Norris says:

        Hi Simon, all is good in the world again. Seems that the cam ring does not and should not be pushed all the way home, but sits just under the rotor. I had pushed the ring all the way home which caused the pickup not to be able to trigger the unit. Much appreciated the fact that even here on the other side of the world, you guys were avaiable 24/7 for support. That is impressive. The unit works really well too, and in my opinion a “must have” for any early mini. Cheers and thanks again, Pat

  4. ralph thorn says:

    do you have ign for six volt positive ground

    • simonbbc says:

      Thank you for your help.
      We have the product available but we would need to know which distributor model you have installed and this should be visible by the numbers from the side of the distributor if you have these? Failing that please send an email with an image of the distributor if possible and one with the cap off too.


  5. Herbert Carachi says:

    Does the electronic ignition system that you supply fit a three cylinder engine on a marruti 800. Thanks.

Leave a Reply to simonbbc Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s